Be sure to match the plywood thickness to the drywall thickness. The plywood will be barely noticeable if done right. Sand the surface smooth, prime, and paint. To provide a clean finish, the drywall can be cutout and the opening filled with the plywood. Plywood can be attached to the wall studs using 3-1/2" lag bolts with fender washers. You will need to use wood in some form to add the necessary strength. If it was a mount that didn't have motion, I might say that's acceptable, but not with a swivel mount. I'd also comment that I have no intention of using the swivel feature.ĭo not use drywall anchors to hang a TV that large on a swivel mount. Between 8 anchors/toggles totaling almost 900 lbs with 2 of them mounted into a steel beam seems to me that it would be sufficient. What if I use the drywall toggles to mount the TV in the 2 holes nearest the center of the mount, then use Drywall anchors with a high weight rating in the other 6 holes. I am going to propose the following and ask what people think. So I bought drywall toggles rated to 110 lbs. It seems like this will work, but I don't want to take chances with the TV. So 2 screws into the anchors and 2 screws into the stud. The anchors I have say they will hold up to 110 lbs. Or the second is a little easier, I can mount the TV into 1 stud and use heavy duty anchors on the other side of the mount. First, put a piece of 3/4" ply wood into the studs and mount the tv on the ply wood. The mount does swivel so it might be pulled on to swivel the tv. The tv weighs 53 lbs and the mount is at most 20 lbs. I have a TV mount that is about 20" wide. I have read several questions on here regarding this topic but my situation is slightly unique.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |